{"id":3944,"date":"2026-11-22T02:00:00","date_gmt":"2026-11-22T02:00:00","guid":{"rendered":"https:\/\/swesd.com\/?p=3944"},"modified":"2026-11-20T19:37:13","modified_gmt":"2026-11-20T19:37:13","slug":"esd-footwear-outsole-condition-before-verification","status":"publish","type":"post","link":"https:\/\/swesd.com\/th\/blog\/esd-footwear-outsole-condition-before-verification\/","title":{"rendered":"\u0e01\u0e32\u0e23\u0e1b\u0e19\u0e40\u0e1b\u0e37\u0e49\u0e2d\u0e19\u0e02\u0e2d\u0e07\u0e1e\u0e37\u0e49\u0e19\u0e23\u0e2d\u0e07\u0e40\u0e17\u0e49\u0e32 ESD: \u0e23\u0e31\u0e01\u0e29\u0e32\u0e1a\u0e31\u0e19\u0e17\u0e36\u0e01\u0e01\u0e32\u0e23\u0e15\u0e23\u0e27\u0e08\u0e2a\u0e2d\u0e1a"},"content":{"rendered":"<p>ESD footwear outsole contamination should be recorded before cleaning changes the evidence. Confirm whether the check is intended to represent the shoes as used or an approved prepared condition, then follow the applicable method. A clean-looking sole does not establish electrical performance, and a failed reading does not by itself prove that dirt is the cause. For electronics production, the useful outcome is a traceable decision about the actual footwear, wearer and floor, with the original observation retained and any corrective action clearly separated from the first result.<\/p>\n<h2>Decide which condition the check must represent<\/h2>\n<p>Start by naming the question. An entrance check asks whether a person may enter under the site&#8217;s verification procedure. An investigation may ask why yesterday&#8217;s acceptable system now behaves differently. A laboratory characterization may require defined specimen preparation. These activities can involve the same shoe but require different records. Do not borrow a preparation step from one activity and quietly apply it to another.<\/p>\n<p>The published <a href=\"https:\/\/cdn.standards.iteh.ai\/samples\/21905\/4e53e79a609548f89d85c8a8f6192b9f\/IEC-61340-4-5-2018.pdf\" rel=\"noopener nofollow\" target=\"_blank\">IEC 61340-4-5:2018 preview<\/a> distinguishes testing footwear in an as-used or as-received condition from testing after cleaning. It is a source for that distinction, not a universal daily shoe-cleaning instruction. Use the edition and procedure adopted by your program, including the relevant preparation and reporting requirements.<\/p>\n<p>Write the intended state on the work record before anyone handles the sole. If the state is uncertain, pause the measurement and ask the responsible ESD coordinator. Otherwise a well-intentioned cleaning action can remove the condition the investigation was meant to assess. Keep production access decisions under the existing site rule while the investigation proceeds.<\/p>\n<h2>Identify the complete footwear arrangement<\/h2>\n<p>Record the shoe model, size and individual pair identity where available. Include approved insoles, socks or other components relevant to the defined verification arrangement. Record the wearer and the floor or entry tester used. A general note saying white ESD shoes is not enough to distinguish two pairs with different service histories or an undocumented replacement component.<\/p>\n<p>The <a href=\"https:\/\/swesd.com\/product\/anti-static-shoes\/\">SWESD white anti-static shoe listing<\/a> gives purchasing a concrete product reference for requesting documentation. The photograph does not establish a particular resistance value, safety classification or chemical-cleaning compatibility. Ask for the current instructions applicable to the delivered item rather than transferring a cleaner recommendation from another shoe with a similar appearance.<\/p>\n<p>For the broader system decision, the <a href=\"https:\/\/swesd.com\/blog\/what-is-esd-footwear\/\">ESD footwear overview<\/a> provides background. This condition review addresses the evidence collected around a check; it does not replace the site&#8217;s qualification or measurement procedure. Keep the relevant instruction revision available to the person making the release decision.<\/p>\n<figure><img decoding=\"async\" src=\"https:\/\/swesd.com\/wp-content\/uploads\/2026\/11\/swesd-esd-footwear-outsole-condition-before-verification-body1-daily20261120.jpg\" alt=\"White ESD shoes beside a separate cloth and closed bottle\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\/><figcaption>White ESD shoes beside a separate cloth and closed bottle. Illustration based on the SWESD product reference; application suitability must be verified.<\/figcaption><\/figure>\n<h2>Observe the sole without altering it<\/h2>\n<p>Use the site&#8217;s approved inspection location and handling arrangement. Observe each shoe separately, including the accessible contact area and edges. Note visible deposits, attached material, unusual discoloration, wetness or physical damage. Describe what is actually seen. A dark mark is an observation; an insulating oil film is a diagnosis that requires additional evidence.<\/p>\n<p>Photographs can help show location and extent when permitted, but they should include enough context to identify the shoe and viewing angle. Retain the original image and connect it to the record. Avoid pressing a contaminated sole against a clean bench simply to take a better picture. The inspection setup must respect the workplace&#8217;s own cleanliness and handling requirements.<\/p>\n<p>Do not scrape, sand, wet or treat a sole as an informal inspection aid. Any action that changes the surface can change the next observation or measurement. If a loose foreign object presents an immediate workplace hazard, follow the local safety response and document what was changed. The need to control a hazard does not justify describing the altered shoe as untouched evidence.<\/p>\n<h2>Keep the first result and the corrective result separate<\/h2>\n<p>Record the first measurement exactly as the approved procedure requires, including the actual reading or instrument outcome and any instrument indication that makes it invalid. Do not overwrite a failure with a later pass. If the measurement was not valid because of a documented setup error, retain that record and state why it was excluded from the decision.<\/p>\n<p>When an authorized correction is made, identify the action and the subsequent test as a new event. Record the approved cleaner or other action, the person performing it and the required readiness condition before retesting. A later acceptable result may support a return-to-use decision within the program. It does not establish that every future occurrence has the same cause.<\/p>\n<p>A repeated discrepancy deserves a process review. Look for shared routes, floor-maintenance changes, issue practices or a particular task where deposits appear. Avoid assigning the problem to an operator on the basis of one reading. Compare evidence under an agreed plan so that the review can distinguish a recurring exposure from an isolated handling event.<\/p>\n<h2>Use a practical condition record<\/h2>\n<p>The table is a proposed local documentation aid, not a standard test method or a set of acceptance limits. Replace its general decision language with the facility&#8217;s approved responsibilities and instructions. Numerical limits belong in the applicable verification procedure, together with the method, equipment and scope to which they apply.<\/p>\n<div style=\"overflow-x:auto;max-width:100%\">\n<table>\n<thead>\n<tr>\n<th>Record stage<\/th>\n<th>Information to preserve<\/th>\n<th>Decision boundary<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Before handling<\/td>\n<td>Shoe identity and intended as-used or prepared state<\/td>\n<td>Do not silently change the specimen<\/td>\n<\/tr>\n<tr>\n<td>Observation<\/td>\n<td>Location and appearance of deposits or damage<\/td>\n<td>Appearance is not electrical acceptance<\/td>\n<\/tr>\n<tr>\n<td>Initial check<\/td>\n<td>Method, instrument result and relevant setup<\/td>\n<td>Retain failures and invalid-result reasons<\/td>\n<\/tr>\n<tr>\n<td>Correction<\/td>\n<td>Approved action and readiness for retest<\/td>\n<td>No unapproved solvent or abrasion<\/td>\n<\/tr>\n<tr>\n<td>Retest<\/td>\n<td>New result linked to original event<\/td>\n<td>Release under the site procedure<\/td>\n<\/tr>\n<tr>\n<td>Follow-up<\/td>\n<td>Recurring location, owner and action<\/td>\n<td>Investigate patterns before assigning cause<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p>A useful record should allow a reviewer to reconstruct the sequence without questioning everyone who was present. Link photographs and instrument results to the same event identifier. If the footwear is held, record its location and prevent it from being issued as available stock while the decision is pending.<\/p>\n<h2>Evaluate the floor connection as well as the shoe<\/h2>\n<p>The EOS\/ESD Association&#8217;s <a href=\"https:\/\/www.esda.org\/news\/understanding-footwear-and-flooring-in-esd-control\/\" rel=\"noopener nofollow\" target=\"_blank\">footwear and flooring explanation<\/a> describes why the two items operate as a combination and why their interface matters. This supports evaluating the actual arrangement rather than treating a shoe label as proof of the installed system. It does not authorize a particular SWESD model for an untested floor.<\/p>\n<p>If several people report a change after working in the same area, preserve the location and timing information. Coordinate with the floor-maintenance owner before changing cleaning materials. Record the approved floor condition relevant to the investigation so that a retest after maintenance is not compared as though nothing else changed.<\/p>\n<p>The <a href=\"https:\/\/swesd.com\/blog\/esd-shoe-sole-resistance-test\/\">shoe sole resistance guide<\/a> addresses the measurement question. Use it as complementary background while keeping this record focused on specimen condition and corrective-action traceability. Changes to the measurement method require their own review; cleaning a shoe should not become an excuse to improvise the electrical test.<\/p>\n<figure><img decoding=\"async\" src=\"https:\/\/swesd.com\/wp-content\/uploads\/2026\/11\/swesd-esd-footwear-outsole-condition-before-verification-body2-daily20261120.jpg\" alt=\"White ESD shoes held separately in an inspection tray\" loading=\"lazy\" style=\"max-width:100%;height:auto\"\/><figcaption>White ESD shoes held separately in an inspection tray. Illustration based on the SWESD product reference; application suitability must be verified.<\/figcaption><\/figure>\n<h2>Set boundaries for cleaning and return to use<\/h2>\n<p>Obtain the footwear supplier&#8217;s maintenance instructions and the site&#8217;s approved cleaning procedure. Confirm the exact product, concentration where applicable, application method and required drying or conditioning state. Do not recommend a solvent solely because it appears in a laboratory standard. A specimen-preparation instruction and routine maintenance serve different purposes and may have different constraints.<\/p>\n<p>Physical damage needs its own decision. Separation, cracking, distortion or unstable fit should be escalated through the responsible route rather than hidden by a satisfactory reading. An electrical result cannot approve a mechanical defect or establish worker protection. Likewise, ESD footwear must not be treated as electrical shock protection without the specific applicable evidence and authorization.<\/p>\n<p>A replacement pair also needs proper control. Record the issued item and complete the site-required checks instead of assuming that any new shoe solves the original problem. If insoles change during the response, consult the <a href=\"https:\/\/swesd.com\/blog\/esd-shoes-replacement-insoles\/\">replacement insole review<\/a> because that is a change to the worn arrangement, not simply a stock exchange.<\/p>\n<h2>Give purchasing a useful supplier question<\/h2>\n<p>An effective inquiry describes the observed condition and the intended maintenance environment. Provide the product reference, delivered lot if available, relevant approved floor and the existing cleaning instruction. Ask which maintenance information applies to the supplied construction and whether the proposed cleaner requires a compatibility review. Do not ask the supplier to confirm a diagnosis that has not been demonstrated.<\/p>\n<p>When ordering additional pairs, request current item identification, available technical documentation and change-notification information. Connect the response to the approved internal item so stores cannot substitute a visually similar version without review. Keep commercial quantities separate from technical approval: a replenishment order is not evidence that the footwear-flooring combination has been accepted.<\/p>\n<p>The most useful corrective action makes the next event easier to interpret. Improve the observation form, label the hold location or clarify who approves the retest. Retain the original condition, the intervention and the final decision as separate pieces of evidence. That produces a defensible return-to-use record without claiming that appearance proves ESD control.<\/p>\n<h2>Educational background on ESD controls<\/h2>\n<p>The following EOS\/ESD Association educational presentation provides wider ESD-control context. It is not a footwear-cleaning demonstration or approval of a particular cleaner. Use the current site procedure for the actual inspection, measurement and maintenance steps.<\/p>\n<div style=\"position:relative;padding-bottom:56.25%;height:0;overflow:hidden\"><iframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/FBNQL2c5mxk\" title=\"Introduction to ESD as part of University Lectures \u2014 EOS\/ESD Association, Inc.\" loading=\"lazy\" allow=\"encrypted-media; picture-in-picture\" allowfullscreen style=\"position:absolute;top:0;left:0;width:100%;height:100%;border:0\"><\/iframe><\/div>\n<h2>Frequently asked questions<\/h2>\n<h3>Should every shoe be cleaned before verification?<\/h3>\n<p>No. First establish whether the approved check requires the as-used condition or a defined prepared condition.<\/p>\n<h3>Does a visible deposit prove the cause of a failed reading?<\/h3>\n<p>No. Preserve the observation and investigate the complete arrangement using the approved procedure.<\/p>\n<h3>Can a later pass replace the original failure record?<\/h3>\n<p>No. Keep the first result, any corrective action and the retest as separate linked events.<\/p>\n<h3>Can a laboratory cleaning instruction become the daily maintenance rule?<\/h3>\n<p>Not automatically. Use the footwear supplier instructions and the maintenance method approved for the site.<\/p>\n<h3>Does a clean-looking shoe establish ESD protection?<\/h3>\n<p>No. Appearance cannot replace the applicable electrical verification and system qualification.<\/p>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Should every shoe be cleaned before verification?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. First establish whether the approved check requires the as-used condition or a defined prepared condition.\"}}, {\"@type\": \"Question\", \"name\": \"Does a visible deposit prove the cause of a failed reading?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Preserve the observation and investigate the complete arrangement using the approved procedure.\"}}, {\"@type\": \"Question\", \"name\": \"Can a later pass replace the original failure record?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Keep the first result, any corrective action and the retest as separate linked events.\"}}, {\"@type\": \"Question\", \"name\": \"Can a laboratory cleaning instruction become the daily maintenance rule?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Not automatically. Use the footwear supplier instructions and the maintenance method approved for the site.\"}}, {\"@type\": \"Question\", \"name\": \"Does a clean-looking shoe establish ESD protection?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Appearance cannot replace the applicable electrical verification and system qualification.\"}}]}<\/script><\/p>\n<style id=\"swesd-article-title-readability\">@media(max-width:767px){.single-post .page-title h1{background:rgba(0,0,0,.72);color:#fff;padding:.35em .45em;text-shadow:0 1px 2px #000;}}<\/style>\n","protected":false},"excerpt":{"rendered":"<p>\u0e1a\u0e31\u0e19\u0e17\u0e36\u0e01\u0e2a\u0e20\u0e32\u0e1e\u0e23\u0e2d\u0e07\u0e40\u0e17\u0e49\u0e32\u0e01\u0e48\u0e2d\u0e19\u0e17\u0e33\u0e04\u0e27\u0e32\u0e21\u0e2a\u0e30\u0e2d\u0e32\u0e14 \u0e41\u0e22\u0e01\u0e01\u0e32\u0e23\u0e15\u0e23\u0e27\u0e08\u0e2a\u0e2d\u0e1a\u0e17\u0e35\u0e48\u0e43\u0e0a\u0e49\u0e41\u0e25\u0e49\u0e27\u0e2d\u0e2d\u0e01\u0e08\u0e32\u0e01\u0e01\u0e32\u0e23\u0e17\u0e14\u0e2a\u0e2d\u0e1a\u0e17\u0e35\u0e48\u0e40\u0e15\u0e23\u0e35\u0e22\u0e21\u0e44\u0e27\u0e49 \u0e41\u0e25\u0e30\u0e1a\u0e31\u0e19\u0e17\u0e36\u0e01\u0e01\u0e32\u0e23\u0e14\u0e33\u0e40\u0e19\u0e34\u0e19\u0e01\u0e32\u0e23\u0e41\u0e01\u0e49\u0e44\u0e02\u0e42\u0e14\u0e22\u0e44\u0e21\u0e48\u0e2a\u0e39\u0e0d\u0e40\u0e2a\u0e35\u0e22\u0e2b\u0e25\u0e31\u0e01\u0e10\u0e32\u0e19\u0e40\u0e14\u0e34\u0e21.<\/p>","protected":false},"author":7,"featured_media":3941,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_gspb_post_css":"","footnotes":""},"categories":[1],"tags":[62],"class_list":["post-3944","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-buyer-guide"],"blocksy_meta":{"styles_descriptor":{"styles":{"desktop":"","tablet":"","mobile":""},"google_fonts":[],"version":8}},"acf":[],"_links":{"self":[{"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/posts\/3944","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/comments?post=3944"}],"version-history":[{"count":1,"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/posts\/3944\/revisions"}],"predecessor-version":[{"id":3945,"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/posts\/3944\/revisions\/3945"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/media\/3941"}],"wp:attachment":[{"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/media?parent=3944"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/categories?post=3944"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/swesd.com\/th\/wp-json\/wp\/v2\/tags?post=3944"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}